This video shows cleaning up a piece after getting it back together.
Step 5 refers to this page, https://www.kintugi.com/?page_id=80
For more on traditional, lacquer based kintsugi see kintugi.com
This video shows the application of high quality, red lacquer as a substrate for #3 rounded gold to the inside of the bowl.
Step 9 in the title refers to this page, https://www.kintugi.com/?page_id=80
For more on traditional, lacquer based kintsugi see kintugi.com
This video shows the mixing of medium and assembly of a bowl. The bowl has breaks very low, they are around the foot of the piece so it is very difficult to get any kind of compression of the piece once it has been put back together.
Step 3 refers to this page, https://www.kintugi.com/?page_id=80
For more on traditional, lacquer based kintsugi see kintugi.com
This video shows the application of #3 rounded gold to the inside of the bowl.
Step 10 refers to this page, https://www.kintugi.com/?page_id=80
For more on traditional, lacquer based kintsugi see kintugi.com
This video shows step 8, sanding of middle black lacquer in preparation for metal. I use polishing stones mesh #2000 and then #3000.
Step 8 refers to this page, https://www.kintugi.com/?page_id=80
This video shows step 6, application of middle black lacquer in preparation for metal. I use a middle thickness brush and apply it as thinly as possible. If it seems too thin then that is about right.
Step 6 refers to this page, https://www.kintugi.com/?page_id=80
This video shows shaping by sanding and cutting. I use special stones, mesh 600 and some sandpaper, mesh 400 There are a couple of very small fills I need to do。